Epoxy Resin Concrete Floor Paint HD

Posted by Tech 06/11/2015 0 Comment(s)

Heavy Duty epoxy Floor Coating Paint is a two-pack solvent free, high build epoxy resin coating for application as a heavy duty coating at a thickness from 200 to 500 microns. The coloured high gloss finish is extremely hard wearing and has good general chemical resistance.


 
The  heavy duty epoxy floor coating has a low-odour during application and provides a sealed, continuous and hygienic floor surface when cured. I recommend to work with a primer first as this will give you a guide on how to install and also gives the substrate its first coating which stops shrinking or as I call it the orange peel effect. Mix one measure at a time, Once mixed It is easily applied by a roller and provides a tough, resilient, corrosion and abrasion resistant finish. After pouring the hardener into the base tin mix for approx. 3-4 mins or until there is no marble effect and it looks uniform, pour into a tray and apply with a medium pile roller. One key thing to remember here is the thinner the film the longer it takes to cure. By this i mean keep the application uniform and bare in mind that the vessel containing the rest of the coating will cure faster. Do'nt hang around you've got around 20 mins depending on the temperature you are working in before the vessel contents goes hard. . 

 

The Heavy epoxy resin floor coating paint is suitable for most industrial floors including concrete, sand and cement screeds and certain types of asphalt and provides a hard wearing, decorative, and dust-free finish. Being low odour, the heavy duty epoxy floor coating is ideal for use throughout industry including the food sector where solvent-based products are obviously unacceptable but hard wearing finishes are critical. The chemical and oil resistant properties make this product ideal for engineering units, automotive workshops and factories where a tough cleanable finish is required. 

 

Product Benefits:

  • High build coatings are obtainable in one application
  • Ventilation for solvent evaporation is not essential for Heavy Duty Coating
  • Hygienic and easy to clean and maintain
  • Good colour stability
  • Suitable for application where a bacteria-free finish is important
  • Excellent high gloss finish
  • No shrinkage on curing
  • Available in a range of colours. Special colours can be produced

 

Where to use:

Suitable for most industrial floors including concrete, sand and cement screeds and certain types of asphalt and provides a hard wearing, decorative, and dust-free finish. Being low odour, Heavy Duty Coating is ideal for use throughout industry including the food sector where solvent-based products are obviously unacceptable but hard wearing finishes are critical. The chemical and oil resistant properties Heavy Duty make the product ideal for engineering units, automotive workshops and factories where a tough cleanable finish is required. 

 

The end finish of the Heavy duty resin floor coating is a show room, Formula 1 high gloss shine. In areas that are prone to water/liquid spills I recommend you view our Anti Slip Heavy duty floor coating. The Anti Slip finish however is a tough but not at shinny/glossy.

 

Leave a Comment